BSWMD - POLY(PHENYLENE SULFIDE), 090
- MSDS: BSWMD
- Manufacturer: SCIENTIFIC POLYMER PRODUCTS INC
- Product Name: POLY(PHENYLENE SULFIDE), 090
- National Stock Number: 6810-00N047319
Product Identification
Product ID:POLY(PHENYLENE SULFIDE), 090
MSDS Date:03/01/1992
FSC:6810
NIIN:00N047319
MSDS Number: BSWMD
Responsible Party
ONTARIO, NY 14519
US
Emergency Phone: 716-265-0413
Info Phone: 716-265-0413
Cage: 0MWG0
Contractor
Telephone: 716-265-0413
Cage: 0MWG0
Ingredients
POLY (THIOPHENYLENE), PYROLYZATE; (POLY (PHENYLENE SULFIDE)
RTECS: TR7824000
Fraction By Weight: 100%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DUST MAY CAUSE MECHANICAL EYE
IRRITATION. INHALATION OF DUST MAY PRODUCE IRRITATION TO MUCOUS
MEMBRANES OF THE NOSE, THROAT AND UPPER RESPIRATORY TRACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE FROM EXPOSURE. IF
BREATHING STOPS, BEGIN MOUTH TO MOUTH. EYES:FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. SKIN:WASH AFFECTED AREA WITH SOAP AND WATER. REM
OVE DIRTY CLOTHING. IN ALL CASES, IF IRRITATION DEVELOPS, SEEK
MEDICAL ASSISTANCE.
Fire Fighting
Flash Point:>930F,>499C
Extinguishing Media:DRY CHEMICAL, FOAM, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . EVACUATE ALL UNNECESSARY PERSONNEL. SULFUR OXIDES AND
CARBONYL SULFIDE RELEASED ON COMBUSTION.
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:SWEEP UP SPILL AND PLACE IN DISPOSAL
CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A DRY PLACE. KEEP CONTAINERS
CLOSED TO PREVENT CONTAMINATION. OPEN CONTAINERS ONLY IN
WELL-VENTILATED AREA.
Other Precautions:KEEP CONTAINERS CLOSED TO PREVENT CONTAMINATION. OPEN
CONTAINERS ONLY IN WELL-VENTILATED AREA. NOTE:THIS MATERIAL IS
INTENDED FOR LABORATORY USE ONLY. IT IS NOT SOLD OR INTENDED FOR
DRUG, HOUSEHOLD OR OTHER USES.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GOGGLES..
Other Protective Equipment:EYEBATH AND/OR SAFETY SHOWER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Spec Gravity:1.8
Solubility in Water:NEGLIGIBLE
Appearance and Odor:POWDER; MILD ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:INCINERATE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.